Air Con Guide

Guide · updated

MVHR cost UK 2026: what it costs to install, run and service

By Alex Christou. 23 sources listed at the end.

On this page

MVHR cost for most UK homes runs from £3,500 to £12,000 installed, and in most retrofits the system will not pay for itself in energy savings. This guide splits the price of mechanical ventilation with heat recovery (MVHR) into its parts, works out running costs from manufacturer fan data at the October 2026 price cap, and shows what Approved Document F makes you budget for.

Quick answer: Published installed totals run from about £3,500 to £5,000 for a flat, £5,000 to £8,000 for a 3 to 4 bed house and £8,000 to £12,000 for a larger home. Electricity for a 3 bed is about £40 to £65 a year at the October 2026 price cap (our working). Retrofits cost more than new builds, mostly because of duct routing. Commissioning is a legal requirement in England, so it should be a line on every quote.

Last checked 26 October 2026: Ofgem price cap, Approved Document F (2021 edition, which applies until the 2026 edition takes effect on 24 March 2027), stockist, manufacturer and local installer pages. Not checked: Nuaire and Brink prices, PIV and MEV prices, HMRC VAT rules. If you are not sure what MVHR is, our guide to what MVHR is covers the basics first.

MVHR cost by home size

Treat these as a starting point for a quote, not a price.

Typical installed totals

Home Installed total Source
1 to 2 bed flat £3,500 to £5,000 MyJobQuote, updated 8 October 2026
3 to 4 bed semi £5,000 to £8,000 MyJobQuote, updated 8 October 2026
4 to 5+ bed detached £8,000 to £12,000 MyJobQuote, updated 8 October 2026
Average installed £6,900 MyJobQuote, updated 8 October 2026

The ClimateWorks installer site carries the same size bands, so count them as one dataset, not two. MyJobQuote says its figures come from quotes on its own platform.

One itemised example sits above the table. Heat, Space and Light, a ventilation supplier, published a premium-spec 150 m2 new build on 19 September 2026. Its lines add up to about £7,800 ex VAT: £5,101 to design, supply and commission, plus £2,730 installation. Its own headline puts third-party installation at £3.6k, which would make it about £8,700. That is its own company pricing, and it sits above the generic table, so a premium design can land above these ranges.

New build versus retrofit

Retrofit costs more. Homebuilding & Renovating quoted quantity surveyor Tim Phillips on 28 February 2024 saying that retrofit installation costs will be higher than for a new build. The Centre for Sustainable Energy (CSE), reviewed July 2026, gives a wider spread by system type: decentralised units from £600 per fan, and central systems from about £3,000 to well over £10,000.

Why quotes range so widely

One retrofitter reported quotes from about £3,000 to over £20,000 for similar work (YouTube, The Jurassic Jungle, December 2023). That is one person's account, so read it as an illustration of the spread, not a market figure. Quotes differ on the design, the duct type and whether commissioning is included. Ask for all three to be itemised.

Where the money goes

Five lines make up most quotes. Compare each against the figures below.

The unit

Unit Price inc VAT Efficiency claim
Vent-Axia Sentinel Kinetic BH £901 up to 91.1% (EN 308)
Vent-Axia Sentinel Kinetic Plus £1,194 up to 92% (EN 308)
Vent-Axia Sentinel Econiq L £2,440 up to 93%

Prices are Electric Point list prices read on 26 October 2026, with the efficiency figures as the manufacturer states them. Heat, Space and Light lists premium Passivhaus-class units at £1,100 to £2,900 ex VAT, about £1,320 to £3,480 with our x1.2 for VAT.

Design and ducting

Design is £300 to £700, depending on the source: Homebuilding says £300 to £500, MyJobQuote £450 to £700, and Heat, Space and Light £485 ex VAT. Ducting and materials come to about £2,100 to £2,500. Heat, Space and Light prices them at £2,103 ex VAT (about £2,520 inc VAT) for 150 m2, and MyJobQuote puts ducting for a 250 m2 home at about £2,250.

Approved Document F (ADF) says rigid ducts should be used wherever possible (para 1.76). Flexible duct is for final connections only, to a maximum of 1.5 m (para 1.77). Ask what duct the quote assumes.

Installation labour

Labour runs from £1,000 to £4,000 over 2 to 5 days (MyJobQuote, 8 October 2026). Homebuilding gives a similar range for professional installers.

Commissioning and the Part F notice

Commissioning costs £400 to £800 (MyJobQuote) or £460 to £597 ex VAT (Heat, Space and Light). It is required. ADF 2021 para 4.1 states: "Mechanical ventilation systems must be commissioned to provide adequate ventilation." A commissioning notice also goes to the building control body (regulation 44; usually within 30 days of completing the work).

An installer on a competent person scheme can self-certify instead. GOV.UK, last updated 17 September 2026, lists four schemes for mechanical ventilation in dwellings: BESCA, Blue Flame Certification, Certsure (NICEIC) and NAPIT. The flow device used needs a hood attachment, an accuracy of +/-5% and UKAS calibration within the last 12 months (ADF). Put commissioning on the quote as its own line. This is general information for England; check with building control.

Why a retrofit costs more

Duct routing

An open loft or a ceilings-down renovation keeps ducting cheap. Finished ceilings and flat roofs do not. Two retrofit videos make this point (The Jurassic Jungle, December 2023, and Andrew Hobbs, October 2022, who fits PIV and so has a commercial interest), so we use them for routing only.

Unit position and access

The Jurassic Jungle video names three siting problems: a low-pitch loft, a unit bigger than the loft hatch, and a unit above a bedroom, where noise matters. ADF para 1.75 expects adequate space for access to maintain the equipment.

Airtightness and the cheaper options

CSE says MVHR works best in buildings that are relatively airtight, and that a retrofit needs an airtightness strategy including tests. ADF adds that efficiency should improve as the dwelling becomes more airtight. Its Table 1.6 lists MVHR as suitable for all dwellings, so airtightness is not a condition of fitting it. It decides how much the system saves. See MVHR versus PIV for the cheaper alternatives. We have not priced PIV or continuous MEV here, because we found no priced source.

Running, filter and servicing costs

Electricity: MVHR running costs

Our working. Basis: Ofgem's price cap for 1 October to 31 December 2026 gives 26.32p per kWh on average, with no VAT on electricity until 31 March 2027. Fan load is the ADF Table 1.3 minimum for a 3 bed, 31 l/s, which is 111.6 m3/h, run all year (8,760 hours). The standing charge is excluded.

Unit Fan power basis Load Per year Cost
Vent-Axia Econiq L 0.53 W/l/s 16.4 W 144 kWh £37.88
Zehnder ComfoAir Q350 0.24 Wh/m3 (Passive House test) 26.8 W 235 kWh £61.75

That gives about £40 to £65 a year for a 3 bed. It is a ballpark: real systems vary fan speed, and the price cap is an average for default tariffs.

Some published figures do not add up at these rates. ClimateWorks gives 20 to 40 W and £40 to £60 a year, but 20 to 40 W run all year is 175 to 350 kWh, or £46 to £92 at the cap. Homebuilding's 300 kWh priced at £156 (February 2024) implies 52p per kWh.

MVHR filters

Filters cost £15 to £120 per set depending on grade, changed every 6 to 12 months (MyJobQuote). Homebuilding gives about £20 per pair up to £120. The Zehnder UK datasheet lists G4, F7 and carbon filters as separate parts, so ask which grade the quote assumes and what a replacement set costs.

MVHR servicing

Nationally, MyJobQuote gives £100 to £300 a year. Homebuilding gives from about £150 for annual maintenance and from about £300 for a professional service. One local price list is Ernest Air Cooling, Shoreham-by-Sea (checked 26 October 2026). Its basic MVHR service is £155 + VAT (£186) and its full service £225 + VAT (£270), with filters extra. That is one firm's published prices, not a market average.

Does MVHR pay back?

In most retrofits, no. Here is the sum.

What the heat recovered is worth

Our working. Ventilation heat loss at 31 l/s is 0.33 x 111.6 m3/h = 36.8 W/K. We assume 2,000 to 2,400 degree-days. That is our assumption, not a Met Office or Brighton figure. It gives about 1,770 to 2,120 kWh of ventilation heat loss a year. At 90% recovery, which is generous, about 1,590 to 1,910 kWh is recovered. Ofgem's gas cap is 7.97p per kWh including 5% VAT. Through a 90% efficient boiler, that is worth about £141 to £169 a year. Subtract fan electricity of £38 to £62 and the net is about £80 to £130.

Payback in years

£5,000 to £8,000 divided by £80 to £130 is 40 to 100 years. Even against the gross £141 to £169 it is 30 to 57 years. In a retrofit, MVHR is a ventilation and air-quality decision. It is a poor energy investment.

Who it is for

The case is strongest for very airtight new builds, deep retrofits, and homes with damp or air-quality problems. The field evidence adds a caution. In the Building Performance Evaluation meta-study of 54 UK low-energy dwellings (Gupta et al., Oxford Brookes, 2016), 77% of the MVHR homes with energy data were Passivhaus construction, so lower energy use cannot be put down to MVHR alone. A second Oxford Brookes study of six social homes found actual energy use about three times design, at an air permeability of 6 against a design target of 3 m3/(h.m2).

Wondering whether it cools? Read MVHR with air conditioning. For cooling bills, see air conditioning running costs.

Can you fit MVHR yourself?

What the parts cost

Unit £900 to £3,480 inc VAT. Ducting and materials about £2,100 to £2,500. Design £300 to £700. Commissioning £400 to £800. With free labour, our working puts that at roughly £3,700 to £7,500.

We found no priced source for a whole-house ducted system under £2,500. A figure that low looks possible only for a small home, a decentralised system, or a PIV or MEV substitute. One 2023 video documents a DIY kit at about £4,000 plus an independent commissioning engineer. That is anecdotal.

Why commissioning stops a borrowed meter

Part F wants measured flow rates from a calibrated device and a commissioning sheet signed by a person competent to install and commission the system (ADF Appendix C3). A borrowed anemometer does not meet that. Budget for an engineer. This is general information for England; check with building control.

What the field studies found

Gupta et al. reviewed 38 sets of commissioning data. Only 6 (16%) showed satisfactory commissioning, and systems were recommissioned in one third of projects. The sample is low-energy new builds with systems designed to the 2006 and 2010 editions of Part F. It is not a verdict on a well-commissioned system today.

Claims to check before you pay

"MVHR recovers 90% or more of the heat"

Lab figures support this for tested units, with limits. The Zehnder ComfoAir Q350 is listed at 96% on its UK datasheet and 91% in Passive House Institute testing. Vent-Axia lists "up to" 91.1% and 92% under EN 308. Installed performance is lower once duct losses, imbalance and bypass count. About 91% to 93% is the lab range for the units we checked. Delivered figures are not guaranteed.

"You do not need trickle vents"

ADF para 1.72 says background ventilators should not be installed with MVHR. It is guidance, and building control can accept alternatives. If the system fails or is switched off, a home with no vents has no designed ventilation. For replacement windows, see ADF paras 3.14 to 3.15.

"MVHR eliminates mould"

The evidence we read does not support that. Gupta et al. found very poor ventilation in some bedrooms overnight where underperforming systems left homes relying on opening windows. The defensible claim is that MVHR reduces moisture when it is commissioned and running.

How to compare MVHR quotes

  1. Ask for the design: duct routes and flow rate for each room.
  2. Ask for the unit model and what its efficiency figure was tested to.
  3. Ask whether the ducting is rigid or semi-rigid, and where flexible duct is used.
  4. Ask for commissioning with a calibrated flow hood, and who gives the Part F notice.
  5. Ask for filter and service prices for years two to ten, and how VAT is treated.

Get three itemised quotes for the same specification.

MVHR installers in Brighton and Hove

Cen Air Solutions lists MVHR and PIV ventilation under its Brighton and Hove services, and Ernest Air Cooling's Brighton page offers MVHR across BN1, BN2 and BN3 (their own pages, checked 26 October 2026). Our MVHR installers in Brighton and Hove page shows what we found for each firm, including where we found nothing, and the wider list covers installers across Brighton and Hove. We list what we found. We do not recommend. We have not checked either firm on a competent person scheme register, so ask for the Part F certificate. Neither page gives an installation price.

Questions

How much does it cost to install a heat recovery ventilation system in the UK?
Installing a heat recovery ventilation system costs about £3,500 to £5,000 for a flat, £5,000 to £8,000 for a 3 to 4 bed house and £8,000 to £12,000 for a larger home, according to MyJobQuote (8 October 2026). ClimateWorks gives the same bands. Retrofits cost more, and quotes can differ widely, so compare itemised quotes.
Does a heat recovery system use a lot of electricity?
A heat recovery system uses little electricity. Our working at the 26.32p cap, for a 3 bed at the ADF minimum rate, gives about £40 to £65 a year. It assumes continuous running at 31 l/s and excludes the standing charge. Real systems change speed, and the cap is an average, so treat it as a ballpark.
Does MVHR stop mould?
MVHR reduces moisture when it is commissioned and running. We found no evidence that it eliminates mould. Gupta et al. found very poor ventilation in some bedrooms overnight where systems underperformed. Mould has other causes too, which this guide did not test. Ask an installer about the cause in your home.
What is the best ventilation system for a home in the UK?
We found no source that names one best system. MVHR suits very airtight homes, and ADF Table 1.6 lists it as suitable for all dwellings. In a retrofit it rarely pays back on energy (our working). Compare it with PIV in our MVHR versus PIV guide, and ask installers for the design.
Does a house need to be airtight for MVHR?
No rule requires it. ADF Table 1.6 lists MVHR as suitable for all dwellings. The benefit depends on it, though: CSE says MVHR works best in relatively airtight buildings, and ADF says efficiency should improve as a dwelling becomes more airtight. Ask for an airtightness test before you pay for a retrofit.
Should MVHR be left on all day?
Yes. Leave MVHR on all day at the installer's commissioned settings; MyJobQuote also says it should run continuously. We found no evidence-based rule for switching it off. The Oxford Brookes social housing study found that users who deactivated MVHR systems worsened indoor air quality, following poor commissioning and limited understanding of the controls. Ask the installer to explain the controls and speeds.

Sources

  1. Cost of installing a heat recovery system, MyJobQuote (read 26 October 2026)
  2. What are the costs associated with installing and running an MVHR system, ClimateWorks (read 26 October 2026)
  3. How much does an MVHR cost to design and install in 2026 and 2027, Heat, Space and Light (read 26 October 2026)
  4. Are heat recovery systems expensive to run, ClimateWorks (read 26 October 2026)
  5. I'm a quantity surveyor and this is how much an MVHR system will cost, Homebuilding & Renovating (read 26 October 2026)
  6. Mechanical ventilation with heat recovery, Centre for Sustainable Energy (read 26 October 2026)
  7. Vent-Axia Sentinel Kinetic BH MVHR, Electric Point (read 26 October 2026)
  8. Vent-Axia Sentinel Kinetic Plus MVHR, Electric Point (read 26 October 2026)
  9. Vent-Axia Sentinel Econiq L MVHR, Electric Point (read 26 October 2026)
  10. Zehnder ComfoAir Q350 UK datasheet, via BPC Ventilation (read 26 October 2026)
  11. Zehnder ComfoAir Q350, Passive House database (read 26 October 2026)
  12. Changes to energy price cap between 1 October and 31 December 2026, Ofgem (read 26 October 2026)
  13. Approved Document F Volume 1: Dwellings, 2021 edition, GOV.UK (read 26 October 2026)
  14. Ventilation: Approved Document F, GOV.UK (read 26 October 2026)
  15. Approved Document F Volume 1: Dwellings, 2026 edition, GOV.UK (cover read 26 October 2026)
  16. Competent person scheme: current schemes and how schemes are authorised, GOV.UK (read 26 October 2026)
  17. Characterising the actual performance of domestic mechanical ventilation and heat recovery systems, Gupta et al. (read 26 October 2026)
  18. Evaluating the influence of building fabric, services and occupant related factors on low energy social housing, Gupta, Kapsali and Howard (read 26 October 2026)
  19. DIY install of Lindab MVHR system, The Jurassic Jungle, YouTube, December 2023 (transcript read 26 October 2026)
  20. MEV and MVHR retrofits and why they should not be the go-to strategies, Andrew Hobbs, YouTube, October 2022 (transcript read 26 October 2026)
  21. AC and MVHR servicing, Ernest Air Cooling (read 26 October 2026)
  22. Air conditioning and MVHR in Brighton, Ernest Air Cooling (read 26 October 2026)
  23. Brighton and Hove services, Cen Air Solutions (read 26 October 2026)

Written and checked by Alex Christou. Found a mistake? Tell us; our corrections policy explains what happens next.

Installers in Brighton who do this